Advanced Dimming Controls with Sensor

On-Off / 3-step dimming function for
LED Panel Light and Tri-proof Light

Sensor DIM LED drivers are innovative products integrated with HF motion detection, daylight sensors and LED power supply.

The products supply a simple energy-saving solution for LED ceiling lights. All control parts are integrated in the same housing, this reduces overall costs making for a faster overall

Features

  • Integrated microwave motion sensor, daylight sensor and LED power supply
  • Automatic switching and dimming based on motion and light level
  • Detection area, time delay and daylight threshold can be precisely set via DIP switch

ON-OFF Function

our new solution provides ON-OFF and step dimming functions for LED lighting,
users and select the right function according to different applications.

With sufficient ambient light, the sensor does not switch on the lamp.
With insufficient ambient light, the sensor switches on the lamp when motion is detected.
After hold time, the lamp gradually dims down if no motion is detected.

3-Step Dimming Option

Our new solution provides ON-OFF and step dimming functions for LED lighting, users can select the right function according to different applications.

With sufficient ambient light, the sensor does not switch on the lamp.
With insufficient ambient light, the sensor switches on the lamp when motion is detected.
After hold time, the lamp gradually dims down if no motion is detected.

After standby period, the sensor switches off the lamp if no motion is detected in its detection zone.

Wiring Scheme

Detection Pattern

Technical Parameters

Model No. PD400-P PD650-P
Operating voltage 1000-277Vac, 50/60Hzt 100-277Vac, 50/60MHz

Output constant current

1000mA (Max)

1500mA (Max)

Output voltage

30-42Vdc

30-42Vdc

Efficiency

≥86%

≥86%

Power Factor

≥0.9

≥0.9

HF System

5.8GHz±75MHz, ISM wave band

5.8GHz±75MHz, ISM wave band

Transmitting Power

<0.2mW

<0.2mW

Transmitting Power

≤1.5W (standby)

≤1.5W (standby)

Detection Zone Max. (DxH)t

16m x 6m

16m x 6m

Detection Sesitivity

10% / 50% / 75% / 100%

10% / 50% / 75% / 100%

Hold Time

10s / 90s / 3min / 10min

10s / 90s / 3min / 10min

Corridor Function

0s / 30s / 10min / +∞

0s / 30s / 10min / +∞

Daylight Sensor

5lux / 15lux / 50lux / Disable

5lux / 15lux / 50lux / Disable

Standby Dimming Level

20% / 35%

20% / 35%

Mounting Height

6m Max.

6m Max.

Motion Detection

0.5~3m/s

0.5~3m/s

Detection Angle

150°(Wall installation) 360°(Ceiling installation)

150°(Wall installation) 360°(Ceiling installation

Working Temperature (Ta)

-20°C~50°C

-20°C~50°C

Size (LxWxH)

190 x 40.5 x 22.8mm

190 x 40.5 x 22.8mm

IP Rating

IP20

IP20

Setting

By selecting the combination on the DIP switch, sensor data can be precisely set for each specific application.

Detection Area

Detection area can be reduced by selecting the combination on the DIP switches to fit precisely each application

Hold Time

Refers to the time period the lamp remains at 100% illumination after no motion detected.

Daylight Sensor

The sensor can be set to only allow the lamp to illuminate below a defined ambient brightness threshold.

When set to disable mode, the daylight sensor will switch on the lamp when motion is detected regardless of ambient light level. 50lux: twilight operation, 15lux, 5lux: darkness operation only.

Corridor Function (Standby Period)

Refers to the time period the lamp remains at a low light level before it completely switches off in the long absence of people.

When set to the “+∞”, the low light is maintained until motion is detected. When set to the “0s”, the light will turn off after hold time.

Standby Dimming Level

The low light level you would like to have after the hold time in the long absence of people.

4 Poachers Lane, Sudbrooke,
Lincoln, Lincolnshire LN2 2GA

     

Disclaimer       Privacy

 

 

 

© Procure Direct Ltd